A brief insight into our production
Tensile test
THE PRODUCTION
Made in
Germany &
Austria
The POP Fender is a 100% European product: the technology center, development and research are based in Austria, and the components are produced in Austria and Germany.
The TPV material is produced in Wales UK and in the USA, TPU in Germany.
We have also made sure that our additional products come from Europe.
This keeps the supply routes short and we can be sure that the production is fair and of high quality.
Small & Compact
The POP Fender is telescopic from 620mm (2’1/2″) to 250mm (9 3/4″) on both sides. The POP Fender is therefore smaller than ANY other fender.
There are new, unimagined stowage possibilities like never before. The POP Fender really saves space on the boat! Pure luxury!
Inherently stable
The POP Fender is inherently stable and is not affected by temperature fluctuations – i.e. it does not implode or inflate.
As temperatures rise, the POP Fender becomes a little softer, as temperatures fall it becomes a little stiffer, but it also works at sub-zero temperatures.
Never run out of air again!
You do not need an air pump. The POP Fender cannot burst – no valve problems!
Environment
POP Fender is made of TPV material – thermoplastic vulcanizates or cross-linked thermoplastic elastomers based on olefins, mainly EPDM with small amount of polypropylene (PP). TPV is:
- free from harmful substances and plasticizers
- non-toxic
- durable
- recyclable
Conventional fenders are all made of PVC, which directly harms the environment by outgassing the plasticizers which is no longer justifiable nowadays.
Once your POP Fender is getting on in years, you can send it back to us. We wash and shred the old POP Fenders so that the material can be reused. In this way, everyone contributes a little bit to a more sustainable world!
For the nerds among you, here are some links for more info about the material:
Environment
POP Fender is made of TPV material – thermoplastic vulcanizates or cross-linked thermoplastic elastomers based on olefins, mainly EPDM with small amount of polypropylene (PP). TPV is:
- free from harmful substances and plasticizers
- non-toxic
- durable
- recyclable
Conventional fenders are all made of PVC, which directly harms the environment by outgassing the plasticizers which is no longer justifiable nowadays.
Once your POP Fender is getting on in years, you can send it back to us. We wash and shred the old POP Fenders so that the material can be reused. In this way, everyone contributes a little bit to a more sustainable world!
For the nerds among you, here are some links for more info about the material:
No squeaking
Conventional fenders “stick” to the surface of the boat and this causes the unpleasant squeaking noise. The POP fender does not stick or squeak and therefore protects the hull of the boatas no high friction is generated.
The POP Fender material TPV does not contain plasticizers and therefore does not squeak.
There is also less streaking.
Gentle on the hull
The POP fender is gentler on your boat hull than conventional PVC fenders because it does not stick to the surface. And you don’t need fender socks!
However, should there ever be any traces, they can be easily removed.
With POP Fender you don’t need fender socks anymore either!
More money saved and according to this forum, fender socks aren’t really all that practical anyway:
Works under water
The POP Fender is the first fender that can be used under water. It can float naturally because the material has a density of 0.92kg/dm³, making it lighter than water.
POP Fender is suitable for NOK locks
NOK locks start at an angle (see picture). As you can use the POP Fender underwater, the underwater hull does not hit the lock wall.
